The IP address can be statically assigned to a NIC through system specific configuration, or dynamically assigned using DHCP or APIPA. One machine can have a lot of IP addresses, as a machine can have more than one NIC, and a NIC can have more than one IP address (however, that's not widely used). Every NIC used to communicate through IP, must have at least one IP address. The IP address is typically used to address a single network interface card ( NIC).

Save only relevant traffic (5 packets) and exclude the unwanted traffic (397 packets).The IP address, something like 192.168.0.10, is used to address an IP endpoint. Number2 - relevant number of packets on interface of Step-4 : save packets Number1- total number of packets captured on interface Instead of “http contains “Google”” please Enter “ip.addr = 104.26.11.240” without double quotes.Īnd hit the enter key, your red filter Colour become green & you can see at the bottom In your case, open cmd prompt (windows user) and Nslookup your URL to find the ip address To apply correct filter, you should know the public IP address or port (or both). (Refer below video for detail information: Note that straight line next to interface means no active traffic on that interface. If you are confused with many options, please remove unwanted connected devices to reduce the options, also open any YouTube video so that you can see the traffic fluctuation on your internet link interface. If you are using wireless router to connect internet, then select the Wi-fi: en0 option. You need to choose the interface you're sniffing data from.

Wireshark http address